- Multi-material TPE-based lattice structures Performance assurance with uncertainty
Project ID: A2-23
PIs: Alireza Amirkhizi (UMass Lowell), Joey Mead (UMass Lowell), Chris Hansen (UMass Lowell) - Printing of Thermoset Elastomers (soft materials)
Project ID: C1-23
PIs: Joey Mead (UMass Lowell), David Kazmer (UMass Lowell), Lu Xuejun (UMass Lowell), Anson Ma (UCONN) - Single step fabrication of 3D capacitive sensor for physiological sensing
Project ID: C5-23
PI: SeungYeon Kang (UConn) - Multimaterial foams with optimized geometries
Project ID: D1-23
PIs: Amir Ameli (UMass Lowell), Emily D. Sanders (Georgia Tech) - Towards Injection Molded Strength: Reinforced Multi-material 3d Printing and Annealing
Project ID: D2-23
PIs: Jay Park (UMass Lowell), David Kazmer (UMass Lowell) - Conjugated High-Performance Polymers for 3D-printing (CHIPP3D)
Project ID: D3-23
PIs: Tim Long (Arizona State University), Yoan Simon (Arizona State University), Amy Peterson (UMass Lowell) - Nonlinear mechanics of spinodal interpenetrating phase composites
Project ID: D4-23
PIs: Emily D. Sanders (Georgia Tech), Christopher Saldana (Georgia Tech) - Integrating Foam 3D Printing into Optimized Geometries
Project ID: A1-22
PI: Amir Ameli (UMass Lowell), Emily D. Sanders (Georgia Tech)
Mentors: DEVCOM Armament Center, DEVCOM Soldier Center, HP, Integrity, Karagozian & Case, Markforged, Sandia, Stratasys - Topology Optimization and Manufacturing of Metal/Polymer Spinodal Composites
Project ID: A3-22
PIs: Emily D. Sanders (Georgia Tech), Christopher Saldana (Georgia Tech)
Mentors: AFRL, Barnes, Compounding Solutions, Green Tweed, HP, Raytheon Technologies, Sandia - Incorporating Liquid Metals into 3D Printing
Project ID: C1-22
PIs: Luyi Sun (UCONN), Montgomery Shaw (UCONN)
Mentors: Compounding Solutions, DEVCOM-SC, Green Tweed, HP, Integrity, Markforged, Raytheon Technologies, Stratasys - Vibration-Assisted Multi-Power (VAMP) Printing
Project ID: C3-22
PIs: Anson Ma (UCONN)
Mentors: AFRL, Akita Innovations, Barnes, CCDC Armament Center, CCDC Soldier Center, Greene Tweed, HP, Integrity, Sandia - Hybrid Additive Manufacturing with In Situ Machining
Project ID: C4-22
PIs: Lei Chen (UMass Lowell)
Mentors: Barnes, Greene Tweed, HP, Markforged, Raytheon Technologies, Sandia, Stratasys - Printing of Fully Compounded Thermoset Elastomers
Project ID: D1-22
PI: Joey Mead (UMass Lowell), David Kazmer (UMass Lowell), Anson Ma (UCONN)
Mentors: AFRL, Barnes, CCDC Armament Center, CCDC Soldier Center, Greene Tweed, Markforged, Sandia, Stratasys - Improved Interlayer Adhesion in 3D Parts
Project ID: D2-22
PIs: Carson Meredith (Georgia Tech), Nese Orbey (UMass Lowell), Jay Park (UMass Lowell)
Mentors: CCDC Armament Center, CCDC Soldier Center, Compounding Solutions, Greene Tweed, HP, Integrity, Markforged, Sandia, Stratasys - Multi-Material TPE for Lattice Material Design
Project ID: D3-22
PIs: Alireza Amirkhizi (UMass Lowell), Chris Hansen (UMass Lowell), Joey Mead (UMass Lowell)
Mentors: AFRL, CCDC Soldier Center, Compounding Solutions, HP, Karagozian & Case, Markforged, Sandia, Stratasys - Printing Polymeric Latexes: From Polymides to SiS Elastomers
Project ID: D4-22
PIs: Tim Long (Arizona State University), Joey Mead (UMass Lowell)
Mentors: AFRL, Akita Innovations, Barnes, CCDC Armament Center, CCDC Soldier Center, Greene Tweed, HP, Intergity, Markforged, Sandia, Stratasys, Raytheon Technologies - Deep Generative Design of Cellular Metamaterials
Project ID: A1-21
PI: Hongyi Xu (UCONN)
Mentors: HP, Raytheon Technology, Sandia - Meso-architectures To Control Residual Stress In AM
Project ID: A2-21
PIs: Emily D. Sanders (Georgia Tech), Christopher Saldana (Georgia Tech)
Mentors: AFRL, HP, Hutchinson, Integrity, Sandia - Residual Stress Modeling in Semi - Crystalline Thermoplastic FFF
Project ID: B1-21
PIs: Marianna Maiaru (UMass Lowell), Christopher Hansen (UMass Lowell)
Mentors: AFRL, Greene Tweed, Stratasys - Printing of Fully Compounded Thermoset Elastomers
Project ID: C1-21
PIs: Joey Mead (UMass Lowell), David Kazmer (UMass Lowell), Anson Ma (UCONN)
Mentors: CCDC Armament Center, CCDC Soldier Center, Greene Tweed, Hutchinson, Stratasys - 3D Printing of Graded Foams
Project ID: C2-21
PIs: Amir Ameli (UMass Lowell), Alireza Amirkhizi (UMass Lowell), David Kazmer (UMass Lowell), Christopher Hansen (UMass Lowell)
Mentors: AFRL, CCDC Armament Center, CCDC Soldier Center, HP, Karagozian & Case, Raytheon Technology, Stratasys - 3D Printing Of Optical Device
Project ID: C4-21
PI: SeungYeon Kang (UCONN)
Mentors: Akita, Integrity, NanOptics, Sandia - 3D Printing Of Sensor Arrays For Chemical and Biological Agents - phase II
Project ID: C5-21
PIs: Manos Tentzeris (Georgia Tech), Natalie Stingelin (Georgia Tech), Gulden Camci-Unal (UMass Lowell), SeungYeon Kang (UCONN)
Mentors: AFRL, CCDC Soldier Center, HP, Sandia - 3D Printing Using Pellets
Project ID: C7-21
PIs: Luyi Sun (UCONN), Montgomery Shaw (UCONN)
Mentors: CCDC Armament Center, Greene Tweed, Stratasys - Improved Interlayer Adhesion in 3D Printed Parts
Project ID: D1-21
PIs: Carson Meredith (Georgia Tech), Nese Orbey (UMass Lowell), Jay Park (UMass Lowell)
Mentors: Akita, CCDC Armament Center, CCDC Soldier Center, Greene Tweed, HP, Integrity - Fused Deposition Manufacturing of Multiple Materials (FD3M)
Project ID: C2-20
PIs: David Kazmer (UMass Lowell), Christopher Hansen (UMass Lowell)
Mentors: CCDC Soldier Center, Greene Tweed, Hutchinson, Stratasys - Machine Learning In-Process Defect Detection and Correction
Project ID: B3-20
PIs: Qian Yang (UCONN), Anson Ma (UCONN)
Mentors: Raytheon Technology, Integrity, Karagozian & Case, CCDC Armament Center, HP - Effects of Polymer Crystallization on Powder-Bed based 3D Printing
Project ID: B5-20
PIs: Jerry Qi (Georgia Tech), Natalie Stingelin (Georgia Tech)
Mentors: CCDC Armament Center, HP - Printing of Fully Compounded Thermoset Elastomers
Project ID: C1-20
PIs: Joey Mead (UMass Lowell), David Kazmer (UMass Lowell)
Mentors: Greene Tweed, CCDC Soldier Center, Akita, Hutchinson, CCDC Armament Center - 3D Printing of Sensor Arrays for Chemical and Biological Agents
Project ID: C3-20
PIs: Manos Tentzeris (Georgia Tech), Natalie Stingelin (Georgia Tech), Seung Yeong Kang (UCONN), Gulden Camci-Unal (UMass Lowell)
Mentors: Greene Tweed, Integrity, CCDC Soldier Center, HP, Raytheon Technology - Foam 3D Printing
Project ID: D2-20
PIs: Amir Ameli (UMass Lowell), Alireza Amirkhizi (UMass Lowell)
Mentors: Integrity, CCDC Soldier Center, Karagozian & Case, Hutchinson, CCDC Armament Center, HP - Methods to Evaluate Residual Stress in 3D Printed Parts
Project ID: B1-19
PIs: Jerry H. Qi (Georgia Tech), Nese Orbey (UMass Lowell)
Mentor: HP
Methods to Evaluate Residual Stress in 3D Printed Parts Annual Report (pdf) - Machine Learning Enabled In-Process Defect Detection
Project ID: B2-19
PIs: Qian Yang (UCONN), Anson Ma (UCONN)
Mentors: Boeing, Desktop Metal, HP, Triton, UTRC
Methods to Evaluate Residual Stress in 3D Printed Parts Annual Report (pdf) - Printing of Thermoset Elastomer Compounds Project
Project ID: C1-19
PIs: Joey Mead (UMass Lowell) & David Kazmer (UMass Lowell)
Mentors: CCDC Soldier Center, Desktop Metal, Hutchinson, UTRC
Printing of Thermoset Elastomer Compounds Project Annual Report (pdf) - Investigation of State of the Art of 3D Printing
Project ID: C2-19
PIs: Anson Ma (UCONN), Jerry H. Qi (Georgia Tech), Chris Hansen (UMass Lowell)
IAB Mentor: HP
Investigation of State of the Art of 3D Printing Annual Report (pdf) - Fused Deposition Manufacturing of Multiple Materials
Project ID: C3-19
PIs: David Kazmer (UMass Lowell) & Christopher Hansen (UMass Lowell)
IAB Mentors: CCDC Soldier Center, Hutchinson, Stratasys
Fused Deposition Manufacturing of Multiple Materials Annual Report (pdf) - Pilot-Scale Binder Jetting for Printing Food and Polymer Parts
Project ID: C5-19
PI: Anson Ma (UCONN)
Mentors: CCDC Soldier Center, Integrity Integration
Pilot-Scale Binder Jetting for Printing Food and Polymer Parts Annual Report (pdf) - Conducting Polymer Blends for 3D Printing
Project ID: D2-19
PIs: John Reynolds, Natalie Stingelin, Jerry Qi (Georgia Tech)
Mentors: Boeing, HP, UTRC
Conducting Polymer Blends for 3D Printing Annual Report (pdf) - Connecting Multi-Material Topology Optimization and Additive Manufacturing to Achieve Structures with Unique Properties
PROJECT ID: A1-18
PI: Glaucio H. Paulino (Georgia Tech)
IAB Mentor: Miguel A. Aguiló (Sandia)
Connecting Multi-Material Topology Optimization and Additive Manufacturing to Achieve Structures with Unique Properties (pdf) - Simulation-Based Design for 3D Printing of Shape Changing Components
PROJECT ID: B2-18
PIs: Jerry Qi (Georgia Tech), Nese Orbey (UMass Lowell)
IAB Mentor: Jeff Court (Midé)
Simulation-Based Design for 3D Printing of Shape Changing Components (pdf) - Development of Performance Prediction and Design Methods for 3D Printed Parts under Uncertainty
PROJECT ID: B3-18
PI: Seung-Kyum Choi (Georgia Tech)
IAB Mentors: Mathew Correa (CCDC Soldier Center), Miguel Alejandro Aguilo (Sandia),
Scott Eastman (United Technologies)
Development of Performance Prediction and Design Methods for 3D Printed Parts under Uncertainty (pdf) - Characterization and Process Monitoring of Selective Laser Sintering for Reclaimed High-Temperature-Resistant Polymers
PROJECT ID: B4-18
PIs: Margaret Sobkowicz Kline (UMass Lowell) Xu Chen (UCONN)
AB Mentors: Thomas Anthony (HP), Paul Olubummo (HP), Lihua Zhao (HP), Rich Baker (Integrity), Scott Eastman (United Technologies)
Characterization and Process Monitoring of Selective Laser Sintering for Reclaimed High-Temperature-Resistant Polymers (pdf) - Multi-Material Digital Light Processing (DLP)-Based 3D Printing
PROJECT ID: C1-18
PIs: Anson Ma (UCONN), Kavin Kowsari (UCONN)
IAB Mentors: Patrick Kinlen (Boeing), John Sailhamer (Hutchinson),
Bill Tredway (United Technologies)
Multi-Material Digital Light Processing (DLP)-Based 3D Printing (pdf) - Fused Deposition Manufacturing of Multiple Materials (FD3M)
PROJECT ID: C2-18
PIs: David Kazmer (UMass Lowell), Christopher Hansen (UMass Lowell)
IAB Mentors: Mathew Correa (CCDC Soldier Center), Victor Jaker (Stratasys), Ken Mahmud (Triton)
Fused Deposition Manufacturing of Multiple Materials (FD3M) (pdf) - Conducting Polymer Blends for 3D Printing
PROJECT ID: D1-18
PIs: John Reynolds (Georgia Tech), Jerry Qi (Georgia Tech), Natalie Stingelin (Georgia Tech)
IAB Mentor: Patrick Kinlen (Boeing)
Conducting Polymer Blends for 3D Printing (pdf)
