HEROES Publications
2026
- Open-Air Plasma Treatment to Enhance Nanoparticle Adhesion on Nylon- and Cotton-Based Fabrics for Chemical Protection., (Karande, S., Grimm, O., Pomerantz, N., Peterson, G., Whitten, J.), ACS applied materials & interfaces, 2026
- Recent Advances in Chemical Recycling and Upcycling of Plastic Waste into Valuable Materials, Chemicals, and Energy: A Comprehensive Review, (Jan, K., Deka, D., Yu, E., Lu, T., Li, K., Jiang, H., Nawaz, K., Webb, E., Ozcan, S., Zou, R., Dai, L., Lei, H., Ruan, R., Zhao, X., Chen, W.), RSC Sustainability, 2026
- Using Controlled Repeatable Wind Conditions to Evaluate Impacts on UAS Performance, (Adam Norton, Brendan Donoghue, Peter Gavriel), In Proceedings of the 19th International Symposium on Experimental Robotics (ISER) 2025, 2026
2025
- A multi-modal sensing based terrain identification approach for active lower limb exoskeletons, (Das, D., Das, O., Inalpolat, M.), Expert Syst. Appl., 275, 126862 126862, 2025
- Hydrogen from low-density polyethylene via nonthermal plasma: Effects of energy density and process parameters, (A. Boules, B. Tabu, E. Brack, T. Alexander, J. Hunter Mack, J. P. Trelles), International Journal of Hydrogen Energy, 204, 153182, 2025.
- Influence of helmet positioning on uncertainty of blunt impact absorption performance tests, (Barlow, G., Da?, D., Das, O., Stapleton, S., Inalpolat, M.), Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 2025.
- Investigation of the Synergistic Effect of Combined Antimicrobial Agents and Insect Repellent Microcapsules on Fabrics, (Arslan, D., Tang, R., Bouldin, R., Mosurkal, R., Sun, Y., Orbey, N.), Industrial & Engineering Chemistry Research, 2025
- Navigating the complexities of advanced recycling: Processes, feedstock, and public health connections in the context of the global plastic pollution crisis, (Matuch, C., Chen, W., Ternes, M., Seay, J.), Environmental Progress & Sustainable Energy, 44, 2025
- Optimizing hydrothermal liquefaction of multilayer plastic films for aromatic-rich oil recovery, (Lachos-Perez, D., Cleveland, S., Hewage, G., Chen, W.), Chemical Engineering Journal, 2025
- Probing the role of calcium carbonate on hydrothermal liquefaction of polyethylene in the presence of supercritical water, (Jan, K., Perez, D., Patil, A., Luciano, R., Miranda, D., Chen, W.), Chemical Engineering Journal, 2025
- Thermal Evaluation of Biocomposites Made from Poly(Lactic Acid) and Cottonseed Byproducts, (He, Z., Nam, S., Kulkarni, S., Kashani, M., Nagarajan, R.), Macromol, 2025
- UA-1 PH2 DECISIVE Testing Handbook: Test Methods and Benchmarking Performance Results for sUAS in Dense Urban Environments, (Adam Norton, Brendan Donoghue, and Peter Gavriel), arXiv, 2025
- Using Controlled Repeatable Wind Conditions to Evaluate Impacts on UAS Performance, (Adam Norton, Brendan Donoghue, Peter Gavriel), In Proceedings of the 19th International Symposium on Experimental Robotics (ISER) 2025, 2025
- Embedded optical sensing systems, (Lidan Cao, Rui Wu, Andres M. Biondi, Sabrina Abedin, Guoqiang Cui, Jason Parker, Carolyn Westmark, Xingwei Wang), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 13435, 281 289, 2025
2024
- Additive manufacturing of thermoplastic elastomer structures using dual material core-shell filaments, (Patil, N., Joshi, K., Lee, J., Strawhecker, K., Dunn, R., Lawton, T., Wetzel, E., Park, J.), Additive Manufacturing, 82, 104044, 2024
- Advanced multifunctional fabrics enabled by bioinspired coatings, (Kulkarni, S., Cyr, J., Xia, Z., Bouldin, R., Kumar, J., Mosurkal, R., Nagarajan, R.), Progress in Organic Coatings, 2024
- An Additively Manufactured Flexible Millimeter- Wave Doppler Radar: Toward Fully Printed High-Frequency Multilayer Flexible Hybrid Electronics, (Tang, H., Zhang, Y., Li, S., Zheng, B., An, S., Haerinia, M., Dong, Y., Huang, Y., Zhao, H., Guo, W., Zhang, H.), IEEE Transactions on Microwave Theory and Techniques, 72, 6706 6715, 2024
- Enhancing Pathogen Identification in Cheese with High Background Microflora Using An Artificial Neural Network-Enabled Paper Chromogenic Array Sensor Approach, (Jia, Z., Lin, Z., Luo, Y., Cardoso, Z., Wang, D., Flock, G., Thompson-Witrick, K., Yu, H., Zhang, B.), Sensors and Actuators B: Chemical, 2024
- Hydrogen production synergy in non-thermal plasma copyrolysis of low-density polyethylene and cellulose, (Boules, A., Tabu, B., Brack, E., Alexander, T., Mack, J., Trelles, J.), International Journal of Hydrogen Energy, 65, 375 380, 2024
- Nanoscale-surface roughness enhances the performance of organic thin-film thermoelectrics, (Kaur, B., Khan, E., Routsi, A., Li, L., Latulippe, A., Sun, H., Drew, C., Kumar, J., Christodouleas, D.), RSC Advances, 14, 37774 37780, 2024
- Reducing Resource Usage for Continuous Model Updating and Predictive Query Answering in Graph Streams, (Liu, Q., King, A., Ge, T.), 2024 IEEE 40th International Conference on Data Engineering (ICDE), 2653 2666, 2024
- Room-Temperature (RT) Extended Short-Wave Infrared (e-SWIR) Avalanche Photodiode (APD) with a 2.6 m Cutoff Wavelength, (Benker, M., Gu, G., Senckowski, A., Xiang, B., Dwyer, C., Adams, R., Xie, Y., Nagarajan, R., Li, Y., Lu, X.), Micromachines, 15, 941 941, 2024
- Surveillance of pathogenic bacteria on a food matrix using machine-learning-enabled paper chromogenic arrays., (Jia, Z., Luo, Y., Wang, D., Holliday, E., Sharma, A., Green, M., Roche, M., Thompson-Witrick, K., Flock, G., Pearlstein, A., Yu, H., Zhang, B.), Biosensors & bioelectronics, 248, 115999, 2024
2023
- Modeling of Interface Loads for EOD Suit Wearers Gao Y, Epstein S, Inalpolat M, Wu YN and Gu Y. Modeling of Interface Loads for EOD Suit Wearers. arXiv preprint arXiv:2302.14028.
- Dynamic Wetting Properties of Silica-Poly (Acrylic Acid) Superhydrophilic Coatings Turkoglu, S.; Zhang, J.; Dodiuk, H.; Kenig, S.; Ratto, J.A.; Mead, J. Polymers, 2023, Vol. 15 (5), p. 1242
- Advanced polymer processing technologies for micro- and nanostructured surfaces: A review Nischay Kodihalli Shivaprakash, Shib Shankar Banerjee Carol Barry and Joey Mead. Technological Advancement of Polymer Nanocomposites: Applications, 2023,Volume 63 (4), p.1051-1342
- Application of a magnetic field to ferromagnetic diodes Strack, G., Kim, J.H., Giardini, S. et al. MRS Advances, 2023, Vol. 8, p. 188–193.
- A holistically 3D-printed flexible millimeter-wave Doppler radar: Towards fully printed high-frequency multilayer flexible hybrid electronics systems, (Tang, H., Zhang, Y., Zheng, B., An, S., Haerinia, M., Dong, Y., Huang, Y., Guo, W., Zhang, H.), ArXiv, abs/2302.12428, 2023
- Accelerated Annealing of Fused Filament Fabricated (FFF) Thermoplastics via an Improved Core-shell Filament, (Pugatch, M., Teece, M., Lee, J., Patil, N., Dunn, R., Hart, K., Wetzel, E., Park, J.), Scientific Reports, 13, 13538, 2023
- Accessibility of adsorption sites for superfine powdered activated carbon incorporated into electrospun polystyrene fibers, (Baghirzade, B., Biswas, P., Moavenzadeh, S., Frederick, B., Reuther, J., Apul, O.), Chemical Engineering Journal, 461, 142009, 2023
- Contextual Autonomy Evaluation of Unmanned Aerial Vehicles in Subterranean Environments, (Donald, R., Gavriel, P., Norton, A., Ahmadzadeh, S.), 2023 9th International Conference on Automation, Robotics and Applications (ICARA), 202 207, 2023
- DECISIVE Benchmarking Data Report: sUAS Performance Results from Phase I, (Norton, A., Ahmadzadeh, R., Jerath, K., Robinette, P., Weitzen, J., Wickramarathne, T., Yanco, H., Choi, M., Donald, R., Donoghue, B., Dumas, C., Gavriel, P., Giedraitis, A., Hertel, B., Houle, J., Letteri, N., Meriaux, E., Khavas, Z., Singh, R., Willcox, G., Yoni, N.), ArXiv, abs/2301.07853, 2023
- Dynamic Wetting Properties of Silica-Poly (Acrylic Acid) Superhydrophilic Coatings, (Turkoglu, S., Zhang, J., Dodiuk, H., Kenig, S., Ratto, J., Mead, J.), Polymers, 15, 1242, 2023
- Effect of Composition on Adhesion and Chemical Resistance in Multilayer Elastomer Laminates, (Yi, J., Walker, M., Zhang, J., Hansen, C., Zukas, W., Mead, J.), ACS Applied Polymer Materials, 2023
- Effects Of Overground-based Versus Treadmill-based Exoskeleton Training Protocols On Human-exoskeleton Performance, (Kao, P., Cring, C., Norton, A., Seay, J.), Medicine & Science in Sports & Exercise, 55, 582 583, 2023
- Fairness-Aware Continuous Predictions of Multiple Analytics Targets in Dynamic Networks, (Liu, R., Liu, Q., Ge, T.), Proceedings of the 29th ACM SIGKDD Conference on Knowledge Discovery and Data Mining, 1512 1523, 2023
- Human Trust After Drone Failure: Study of the Effects of Drone Type and Failure Type on Human-Drone Trust, (Khavas, Z., Majdi, A., Ahmadzadeh, S., Robinette, P.), 2023 20th International Conference on Ubiquitous Robots (UR), 685 692, 2023
- Hydrogen from cellulose and low-density polyethylene via atmospheric pressure nonthermal plasma, (Tabu, B., Veng, V., Morgan, H., Das, S., Brack, E., Alexander, T., Mack, J., Wong, H., Trelles, J.), International Journal of Hydrogen Energy, 2023
- Modeling of Interface Loads for EOD Suit Wearers, (Gao, Y., Epstein, S., Inalpolat, M., Wu, Y.-N., Gu, Y.), ArXiv (Cornell University), 2023
- On the Use of Real-Time Multi-Object Detection and Classification for Automated Assessment of Operator Visual Attention Allocation, (Choi, M., Wickramarathne, T.), 2023 26th International Conference on Information Fusion (FUSION), 1 7, 2023
- Oxime-Functionalized, Nonwoven Nanofabrics for Rapid, Inexpensive Decontamination of a Nerve Agent Simulant, (Biswas, P., Shuster, D., Baghirzade, B., Scanga, R., Harris, S., Tran, C., Apul, O., Reuther, J.), ACS Applied Nano Materials, 6, 3425 3434, 2023
- Quantitatively Assessing the Respiratory Burst in Innate Immune Cells., (Sargent, A., Leedberg, J., Burress, J., Dalwadi, P., O'Fallon, K., Gaffney-Stomberg, E., Gaines, P.), Methods in molecular biology, 2614, 47 70, 2023
- Simulation of the Effect of Correlated Packet Loss for sUAS Platforms Operating in Non-Line-of-Sight Indoor Environments, (Meriaux, E., Weitzen, J., Norton, A.), Drones, 7, 485, 2023
- Structure Property Investigation of Knit Patterns on Thermal Comfort: A Holistic Approach, (Kabir, S., Uluturk, I., Pang, R., Khadse, N., Stapleton, S., Park, J.), ACS Applied Engineering Materials, 2023
- Test Methodologies for Evaluating the Effectiveness of sUAS Communication Links for Operation in Indoor and Subterranean Environments, (Meriaux, E., Weitzen, J., Yoni, N., Norton, A.), Journal of Testing and Evaluation, 51, 6, 2023
2022
- Overcoming Variability in Printed RF: A Statistical Method to Designing for Unpredictable Dimensionality Berry K, Brown E.M, Pothier B, Fedorka S, Akyurtlu A, Armiento C, Walsh G.F, Shemelya C, Designs, 2022, Vol. 6 (1), p. 13
- Analysis of post-condensation and thermo-oxidative degradation in cycloaliphatic polyamide through time-resolved rheology (TRR) Venoor, Varun, Jo Ann Ratto, David O. Kazmer, and Margaret J. Sobkowicz, Rheologica Acta, 2022, Vol. 61, p. 319–337
- Flow-through electrochemical immunoassay for targeted bacteria detection Parthena Chorti a, Abbas Parvez Kazi a, Al-Monsur Jiaul Haque a, Michael Wiederoder b, Dionysios C. Christodouleas , Sensors and Actuators B: Chemical, 2022, Vol. 351, p. 130965
- Characterizing the Effects of Explosive Ordnance Disposal Operations on the Human Body While Wearing Heavy Personal Protective EquipmentYi-Ning Wu, Adam Norton, Michael R. Zielinski, Pei-Chun Kao, Andrew Stanwicks, Patrick Pang, Charles H. Cring, Brian Flynn, and Holly A. Yanco, The Journal of the Human Factors and Ergonomic Society, 2022, Vol. 64 (7), p. 1105-1260
- Characterizing Human Performance During Soldier-Relevant Tasks with a Knee-Actuated Exoskeleton, (Pei-Chun Kao, Adam Norton, Yi-Ning Wu, John W. Ramsay, Karen N. Gregorczyk, and Holly A. Yanco), Journal of DoD Research and Engineering, 5, 12 24, 2022 null
- Enhanced interlayer strength and thermal stability via dual material filament for material extrusion additive manufacturing Brian Koker, Rebecca Ruckdashel, Hikma Abajorga, Nicholas Curcuru, Michael Pugatch, Ryan Dunn, David O. Kazmer, Eric D. Wetzel , Jay H. Park, Additive Manufacturing, 2022,Vol. 55, Pages 1-10
- Smart E-Textiles: Overview of Components and Outlook R. Ruckdashel, N. Khadse, J. H. Park, Sensors, 2022, Vol. 22 (16), p. 6055
- Temperature Responsive PBT Bicomponent Fibers for Dynamic Thermal Insulation N. Khadse, R. Ruckdashel, S. Macajoux, H. Sun, J. H. Park, Polymers, 2022, Vol. 14 (14), p. 2757
- Wetting Characteristics of Nanosilica-Poly (acrylic acid) Transparent Anti-Fog Coatings Turkoglu S, Zhang J, Dodiuk H, Kenig S, Ratto JA, Mead J. Polymers, 2022,Vol. 14 ( 21), p. 4663
- IMPROVED ADHESION IN ELASTOMERIC LAMINATES USING ELASTOMER BLENDS Jianan Yi, Erin Keaney, Jinde Zhang, Christopher Hansen, Walter Zukas, Joey Mead. Rubber Chemistry and Technology, 2022, Vol. 95 (3), p. 465–478.
- The reduction in ice adhesion using controlled topography superhydrophobic coatings Yujie Wang, Jinde Zhang, Hanna Dodiuk, Samuel Kenig, Jo Ann Ratto, Carol Barry, Joey Mead, Journal of Coatings Technology and Research, 2023,Vol. 20 (2), p. 469-483
- The effect of superhydrophobic coating composition on the topography and ice adhesion Yujie Wang , Jinde Zhang , Hanna Dodiuk , Shmuel Kenig , Jo Ann Ratto , Carol Barry , Sevil Turkoglu , Joey Mead, Cold Regions Science and Technology, 2022, Vol. 201, p. 103623
- Spatial coherence filtering of normal incidence light through leaky mode engineering H. Li, M. Haerinia, B. Zheng, S. An, H. Tang, Y. Dong, C. Fowler, W. Guo, H. Zhang, and M. Ghebrebrhan, AIP Advances, 2022, Vol. 12 (3), p. 035033
- Nonthermal atmospheric plasma reactors for hydrogen production from low-density polyethylene Benard Tabu, Kevin Akers, Peng Yu, Mammadbaghir Baghirzade, Eric Brack, Christopher Drew, J Hunter Mack, Hsi-Wu Wong, Juan Pablo Trelles, International Journal of Hydrogen Energy, 2022, Vol. 47 (94), p. 39743-39757
- Microencapsulation and controlled release of insect repellent geraniol in gelatin/gum arabic microcapsules James D Ogilvie-Battersby, Ramaswamy Nagarajan, Ravi Mosurkal, Nese Orbey, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022,Vol. 640, p. 128494
- Surface Segregation of Zinc Oxide Nanoparticles in Polymer Films and Fibers: Implications for Functionalized Fabrics Sol Kim, Dulanga Somaratne, O. C. Grimm., D., Steeves, J. Soares, R. Pang, E. A. Welsh, J. Whitten. ACS Appl. Nano Mater, 2022, Volume 5(3), p. 3992-3999
- DECISIVE Test Methods Handbook: Test Methods for Evaluating sUAS in Subterranean and Constrained Indoor Environments, Version 1.1, (Norton, A., Ahmadzadeh, R., Jerath, K., Robinette, P., Weitzen, J., Wickramarathne, T., Yanco, H., Choi, M., Donald, R., Donoghue, B., Dumas, C., Gavriel, P., Giedraitis, A., Hertel, B., Houle, J., Letteri, N., Meriaux, E., Khavas, Z., Singh, R., Willcox, G., Yoni, N.), ArXiv, abs/2211.01801, 2022
- Evaluation of Navigation and Trajectory-following Capabilities of Small Unmanned Aerial Systems, (Meriaux, E., Jerath, K.), 2022 IEEE International Symposium on Technologies for Homeland Security (HST), 1 7, 2022
- Microencapsulation and controlled release of insect repellent geraniol in gelatin/gum arabic microcapsules, (Ogilvie-Battersby, J., Nagarajan, R., Mosurkal, R., Orbey, N.), Colloids and Surfaces A: Physicochemical and Engineering Aspects, 640, 128494, 2022
- On the Development of Quantitative Operator Situational Awareness Assessment Methods for Small-Scale Unmanned Aircraft Systems, (Choi, M., Houle, J., Wickramarathne, T.), 2022 25th International Conference on Information Fusion (FUSION), 1 8, 2022
- Voltage-dependent extended shortwave infrared (e-SWIR) photodetection-band tuning utilizing the Moss Burstein effect, (Xiang, B., Gu, G., Nagarajan, R ., Drew, C., Lu, X.), Journal of Physics D: Applied Physics, 56, 55101 55101, 2022
2021
- Understanding the Effect of Water in Polyamides: A Review Venoor, Varun, Jay Hoon Park, David O. Kazmer, and Margaret J. Sobkowicz. Polymer Reviews, 2021, Vol. 61 (3), p. 598-645
- High-Throughput Flow-Through Direct Immunoassays for Targeted Bacteria Detection Parthena Chorti, Abbas Parvez Kazi, Michael Wiederoder, Dionysios C Christodouleas, Anal. Chem.,2021, Vol. 93 (44), p. 14586-14592
- Pressure monitoring based identification of the EOD suit–human interface load distribution Nicholas Deane, Yan Gu, Pei-Chun Kao, Yi-Ning Wu, Michael Zielinski, and Murat Inalpolat. International Journal of Intelligent Robotics and Applications, 2021,Vol. 5, p. 410-423
- Smart Textiles: A Toolkit to Fashion the Future R. Ruckdashel, D. Venkataraman, and J. H. Park, Journal of Applied Physics, 2021, Vol. 129, p. 130903
- Two-Stage Pyrolysis/Gasification and Plasma Conversion Technology for the Utilization of Solid Waste X. Cai, H. Cai, C. Shang, and C. Du, IEEE Trans. Plasma Sci, 2021, Vol. 49 (1), p. 191–213
- Pressure monitoring based identification of the EOD suit–human interface load distribution Nicholas Deane, Yan Gu, Pei-Chun Kao, Yi-Ning Wu, Michael Zielinski & Murat Inalpolat- International Journal of Intelligent Robotics and Applications, 2021, Vol. 5, p. 410-423
- Sullivan, Connor. Development of Voltammetric Methodologies for the Rapid Environmental Detection of Cadmium, Copper, Arsenic, and Selenium. ProQuest Dissertations Publishing, 2021
- Facile microwave assisted flame retardant treatment for cotton fabric using a biobased industrial byproduct: phytic acid Yu, Shiran, Zhiyu Xia, Weeradech Kiratitanavit, Sourabh Kulkarni, Jayant Kumar, Ravi Mosurkal, and Ramaswamy Nagarajan. Cellulose, 2021, Vol. 28, p. 10655-10674.
- Bio-Based Flame-Retardant Coatings Based on the Synergistic Combination of Tannic Acid and Phytic Acid for Nylon–Cotton Blends Sourabh Kulkarni, Zhiyu Xia, Shiran Yu, Weeradech Kiratitanavit, Alexander B. Morgan, Jayant Kumar, Ravi Mosurkal, and Ramaswamy Nagarajan, ACS Applied Materials and Interfaces, 2021, Vol. 13 (51), p. 61620 – 61628
- Cyanuric Chloride-Based Reactive Dyes for Use in the Antimicrobial Treatments of Polymeric Materials Ruogu Tang, Jianchuan Wen, Robert E Stote, Yuyu Sun, ACS Applied Materials & Interfaces, 2021, Vol. 13 (1), p. 1524–1534
- Effect of strain rate on the mechanical properties of polycarbonate processed by compression and injection molding Fabian Ullrich, Shailendra Pal Veer Singh, Sean McDonald, Alex Krueger, Javier Vera-Sorroche, Alireza Amirkhizi, Davide Masato, Polymer Engineering & Science, 2021, Vol. 62 (1), p. 174-184.
- Facile Trace Mercury (II) Sensor Using Statistically Optimized Electrochemical Co-Deposited Gold Nanofilm Modified Screen-Printed Carbon Electrodes, (Lu, D., Sullivan, C., Brack, E., Drew, C., Kurup, P.), IEEE Sensors Journal, 21, 2485 2494, 2021
- Fluorination of an N,N,N?,N?-Tetraphenylbenzidine Derivative as a Dopant-Free Hole-Transporting Material for Moisture-Resistant Perovskite Solar Cells, (Bae, Y., Li, L., Yang, K., Mosurkal, R., Kumar, J.), ACS Applied Energy Materials, 4, 10459 10467, 2021
- Methods for Combining and Representing Non-Contextual Autonomy Scores for Unmanned Aerial Systems, (Hertel, B., Donald, R., Dumas, C., Ahmadzadeh, S.), 2022 8th International Conference on Automation, Robotics and Applications (ICARA), 135 139, 2021
- On The Use of Small-Scale Unmanned Autonomous Systems for Decision-Support in Subterranean Environments: The Case of Operator Situational Awareness Assessment, (Choi, M., Houle, J., Letteri, N., Wickramarathne, T.), 2021 IEEE International Symposium on Technologies for Homeland Security (HST), 1 6, 2021
- PRESSURE MONITORING BASED IDENTIFICATION OF THE EOD SUIT HUMAN INTERFACE LOAD DISTRIBUTION, (Deane, N., Gu, Y., Kao, P., Wu, Y., Zielinski, M., Inalpolat, M.), International Journal of Intelligent Robotics and Applications, 5, 410 423, 2021
- Pressure monitoring based identification of the EOD suit human interface load distribution, (Deane, N., Gu, Y., Kao, P., Wu, Y., Zielinski, M., Inalpolat, M.), International Journal of Intelligent Robotics and Applications, 5, 410 423, 2021
- Test Methods to Evaluate Mapping Capabilities of Small Unmanned Aerial Systems in Constrained Indoor and Subterranean Environments, (Norton, A., Gavriel, P., Donoghue, B., Yanco, H.), 2021 IEEE International Symposium on Technologies for Homeland Security (HST), 1 8, 2021
- Voltammetric Determination of Trace Methyl Parathion Using Electrochemically Reduced Graphene Oxide Modified Carbon Screen-Printed Electrodes, (Azimi, H., Sullivan, C., Lu, D., Brack, E., Drew, C., Kurup, P.), SSRN Electronic Journal, 15, 356 370, 2021
- * Voltammetric detection of arsenic (III) using gold nanoparticles modified carbon screen printed electrodes: Application for facile and rapid analysis in commercial apple juice, (Sullivan, C., Lu, D., Senecal, A., Kurup, P.), Food Chemistry, 352, 129327, 2021
2020
- Design and Evaluation of General Purpose, Barrier, and Multichannel Plasticating Extrusion Screws Kazmer, David; Clemens Grosskopf, and Varun Venoor. Polymer Engineering and Science, 2020, Vol. 60 (4), p. 752-764
- One-layer water vapor poly(olefin) barriers compete metal sputtering onto flexible substrates Tanmoy Maji, Kostas Tsimenidis, Ramaswamy Nagarajan, Ravi Mosurkal, Jayant Kumar, Manos Gkikas. Polymer, 2020,Vol. 197, p. 122487
- Hybrid Perovskites with Larger Organic Cations Reveal Autocatalytic Degradation Kinetics and Increased Stability under Light Ellis, C. L. C.; Javaid, H.; Smith, E. C.; Venkataraman, D. Inorg. Chem., 2020, Vol. 59 (17), p. 12176-12186
- Hydrogen from Waste Plastics by Two-Stage Pyrolysis/Low-Temperature Plasma Catalytic Processing I. Aminu, M. A. Nahil, and P. T. Williams, Energy Fuels, 2020, Vol. 34 (9), p. 11679–11689
- Combat helmet liner design for blunt impact absorption using multi-output Gaussian process surrogates Drane P, Stapleton SE, Fasel B, Inalpolat M. Proceedings of the Institution of Mechanical Engineers, 2020, Vol. 235 (16), p. 2934 - 2951
- Facile Trace Mercury (II) Sensor Using Statistically Optimized Electrochemical Co-Deposited Gold Nanofilm Modified Screen-Printed Carbon Electrodes Dingnan Lu, Connor Sullivan, Eric Brack, Christopher Drew, Pradeep Kurup. IEEE Sensors Journal, 2020, Vol. 21 (3), p. 2485-2494
- Voltammetric codetection of arsenic(III) and copper(II) in alkaline buffering system with gold nanostar modified electrodes Connor Sullivan, Dingnan Lu, Eric Brack, Christopher Drew, Pradeep Kurup. Analytica Chimica Acta, 2020, Vol. 1107, p. 63-73
- Simultaneous voltammetric detection of cadmium(II), arsenic(III), and selenium(IV) using gold nanostar–modified screen-printed carbon electrodes and modified Britton-Robinson buffer Dingnan Lu, Connor Sullivan Eric Brack, Christopher Drew, Pradeep Kurup. Analytical and Bioanalytical Chemistry, 2020, Vol. 412, p. 4113 – 4125
- A Bio-derived Char Forming Flame Retardant Additive for Nylon 6 Based on Crosslinked Tannic Acid Xia Zhiyu, Weeradech Kiratitanavit, Patrick Facendola, Shiran Yu, Jayant Kumar, Ravi Mosurkal, and Ramaswamy Nagarajan. Thermochimica Acta, 2020, Vol. 693, p. 178750.
- Unusual role of labile phenolics in imparting flame resistance to polyamide Yu, S., Xia, Z., Kiratitanavit, W., Thota, S., Kumar, J., Mosurkal, R., & Nagarajan, R. Polymer Degradation and Stability, 2020, Vol. 175, p. 109103
- Mesomechanical Modeling of Braided Cords Barry C, Panerai F, Bergeron K, Stapleton S, Sherwood J. Procedia Manufacturing, 2020, Vol. 47, p.162-168
- Unusual role of labile phenolics in imparting flame resistance to polyamide Shiran Yu, Zhiyu Xia , Weeradech Kiratitanavit , Sammaiah Thota , Jayant Kumar, Ravi Mosurkal, Ramaswamy Nagarajan, Polymer Degradation and Stability, 2020,Vol.175, p.10.
- Covalent functionalization of cellulose in cotton and a nylon-cotton blend with phytic acid for flame retardant properties S. Thota, V Somisetti, S. Kulkarni, J. Kumar. R. Nagarajan, R Mosurkal. Cellulose, 2020, Vol. 27, p. 11-24.
- Effects of ingested food-grade titanium dioxide, silicon dioxide, iron (III) oxide and zinc oxide nanoparticles on an in vitro model of intestinal epithelium: Comparison between monoculture vs. a mucus-secreting coculture model I. S. Sohal, G. DeLoid, K. O’Fallon, P. Gaines, P. Demokritou, D. Bello. NanoImpact, 2020, Vol 17, p. 15
- Covalent functionalization of cellulose in cotton and a nylon-cotton blend with phytic acid for flame retardant properties Thota, S., Somisetti, V., Kulkarni, S., Kumar, J., Nagarajan, R., Mosurkal, R. Cellulose, 2020, Vol. 27, Pages: 11-24
- Combat helmet liner design for blunt impact absorption using multi-output Gaussian process surrogates, (Barlow, G., Page, C., Drane, P., Stapleton, S., Fasel, B., Inalpolat, M.), Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235, 2934 2951, 2020
- Cyanuric Chloride-Based Reactive Dyes for Use in the Antimicrobial Treatments of Polymeric Materials., (Tang, R., Wen, J., Stote, R., Sun, Y.), ACS applied materials & interfaces, 13, 1524 1534, 2020
- Design and Evaluation of General Purpose, Barrier, and Multichannel Plasticating Extrusion Screws, (Kazmer, D., Grosskopf, C., Rondeau, D., Venoor, V.), Polymer Engineering and Science, 60, 752 764, 2020
- Hole Transport Bilayer for Highly Efficient and Stable Inverted Perovskite Solar Cells, (Javaid, H., Duzhko, V., Venkataraman, D.), ACS Applied Energy Materials, 4, 72 80, 2020
- Inductive quantification of energy absorption of high-density polyethylene foam for repeated blunt impact, (Drane, P., Jesus-Vega, M., Inalpolat, M., Sherwood, J., Orbey, N.), Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234, 531 545, 2020
- Simultaneous voltammetric detection of cadmium(II), arsenic(III), and selenium(IV) using gold nanostar modified screen-printed carbon electrodes and modified Britton-Robinson buffer, (Lu, D., Sullivan, C., Brack, E., Drew, C., Kurup, P.), Analytical and Bioanalytical Chemistry, 412, 4113 4125, 2020
2019
- Experimental Evaluation of Microclimate Cooling Garments Under Controlled Ambient Conditions Baghirzade, Mammadbaghir, Samuel Burns, Hongwei Sun, Margaret Sobkowicz-Kline, Stephen Johnston, J. Hunter Mack. Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE), 2019, p.6
- The use of ion-selective membranes to study cation transport in hybrid organic–inorganic perovskites Smith, E. C.; Ellis, C. L. C.; Javaid, H.; Arden, B. G.; Venkataraman, D. Phys. Chem.,2019, Vol. 37, p. 20720-20726
- Continuous manufacturing of reentrant structures via roll-to-roll process Nischay Kodihalli Shivaprakash, Jinde Zhang, Artee Panwar, Carol Barry, Quoc Truong, Joey Mead. J. Appl. Polym. Sci. 2019, Vol. 136, (1), p.8
- Roll-to-Roll Hot Embossing of High Aspect Ratio Micro Pillars for Superhydrophobic Applications N. Kodihalli Shivaprakash, J. Zhang, T. Nahum, C. Barry, Q. Truong, J. Mead. International Polymer Processing, 2019, Vol. 34 (5), p. 502-512
- Fabrication of Flexible Polymer Molds for Polymer Microstructuring by Roll-to-Roll Hot Embossing Kodihalli Shivaprakash, Nischay; Ferraguto, Thomas; Panwar, Artee; Banerjee, Shib Shankar; Barry, Carol; and Mead, Joey. ACS Omega,2019, Vol. 4 (7), p. 12480-12488
- Biocatalytic Synthesis of Fluorescent Conjugated Polyserotonin Kiratitanavit, W., Bruno, F. F., Xia, Z., Yu, S., Kumar, J., & Nagarajan, R. Journal of Renewable Materials, 2019, Vol.7 (2), p. 205-214.
- Electrochemical Effects of Depositing Iridium Oxide Nanoparticles onto Conductive Woven and Nonwoven Flexible Wickramasinghe, D.; Oh, J.‐M.; McGraw, S Senecal, K.; Chow, K.‐F. ACS Applied Energy Materials 2019, Vol. 2(1), p. 372-381
- Light-Sensitive Gas Sensors Based on Thiol-Functionalized N-Isopropylacrylamide Polymer–Gold Nanoparticle Composite Films Y. Cozzens, D.M. Steeves, J.W. Soares, J.E. Whitten. Macromolecules, 2019 Vol. 52 (7), p. 2900-2910
- Vortical Fountain Flows in Plasticating Screws - Kazmer, David, Clemens Grosskopf, and Varun Venoor. Polymers, 2018, Vol. 10 (8), p. 823-831
- Covalent functionalization of cellulose in cotton and a nylon-cotton blend with phytic acid for flame retardant properties, (Thota, S., Somisetti, V., Kulkarni, S., Kumar, J., Nagarajan, R., Mosurkal, R.), Cellulose, 27, 11 24, 2019
- Light-Sensitive Gas Sensors Based on Thiol-Functionalized N-Isopropylacrylamide Polymer Gold Nanoparticle Composite Films, (Cozzens, Y., Steeves, D., Soares, J., Whitten, J.), Macromolecules, 52, 2900 2910, 2019
- The Use of Ion-Selective Membranes to Study Cation Transport in Hybrid Organic-Inorganic Perovskites, (Smith, E., Ellis, C., Javaid, H., Arden, B., Venkataraman, D.), Physical chemistry chemical physics : PCCP, 21, 20720 20726, 2019
2018
- Vortical Fountain Flows in Plasticating Screws Kazmer, David, Clemens Grosskopf, and Varun Venoor. Olymers, 2018, Vol. 10 (8), p. 823-831
- Bicomponent Fiber Extraction Process for Textile Applications Philip Mooney, John Shearer, PhD, Joey Mead, PhD, Carol Barry, PhD, Quoc Truong, Elizabeth A. Welsh Richard Pang , Walter Zukas, PhD , Peter Stenhouse, PhD , Philip Brown, PhD , Nicole Hoffman. Journal of Engineered Fibers and Fabrics, 2018 Vol. 13,(1), p. 33-39
- Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model L. Dangora, C. Mitchell, J. Sherwood, J. Parker. International Journal of Material Forming, 2018 Vol. 11, (1), p. 43-52
- Facile enzymatic preparation of fluorescent conjugated polymers of phenols and their application in sensing Kiratitanavit, W., Bruno, F. F., Kumar, J., & Nagarajan, R. Journal of Applied Polymer Science, 2018, Vol.135, (30), p.12.
- Fire resistant polyphenols based on chemical modification of bio-derived tannic acid Z Xia, W. Kiratitanavit, P. Facendola, S. Thota, S. Yu, J. Kumar, R. Nagarajan, R. Mosurkal. Polymer Degradation and Stability,2018,Vol.153, p.227-243.
- Dissolution Behavior and Biodurability of Ingested Engineered Nanomaterials in the Gastrointestinal Environment Sohal IS, YK Cho, KS O'Fallon, P Gaines, P Demokritou, D Bello. ACS Nano, 2018, Vol.12 (8), p. 8115–8128.
- Ingested engineered nanomaterials: state of science in nanotoxicity testing and future research needs Sohal IS, KS O'Fallon, P Gaines, P Demokritou, D Bello. Particle and Fibre Toxicology, 2018, Vol. 15, p. 31
- Multifunctional metal oxide nanoparticle decorated polypropylene knitted swatches Unlu, J.W. Soares, D.M. Steeves, R. Pang, E.A. Welsh, J.E. Whitten. J. Mater. Sci.,2018 Vol. 53, Pges 1514-1526.
- Continuous manufacturing of reentrant structures via roll to roll process, (Shivaprakash, N., Zhang, J., Panwar, A., Barry, C., Truong, Q., Mead, J.), Journal of Applied Polymer Science, 136, 1, 2018
2017
- FR Materials Strategic Program T. Tiano, R. Mosurkal, M. McPartlin, P. Yip, S. Johnston. DTIC publication Annual Report, FY 2017
- Deep-Drawing Forming Trials on a Cross-Ply Thermoplastic Lamina for Helmet Preform Manufacture L. Dangora, C. Mitchell, J Sherwood, J. Parker. Journal of Manufacturing Science and Engineering, 2017, Vol 139, (3), p.8
- Intumescent flame-retardant cotton produced by tannic acid and sodium hydroxide S. Nam, B. Condon, Z. Xia, R. Nagarajan, D. Hinchliffe, C. Madison. Journal of Analytical and Applied Pyrolysis, 2017, Vol. 126, p. 239-246.
- Textile Frequency Selective Surface M. Ghebrebrhan, F. Aranda, G. Walsh, D. Ziegler, S. Giardini, J. Carlson, B. Kimball, D. Steeve, S. Xia, S. Yu, E Kingsley, R. Nagarajan, J. Torcedo, R. Williams, A. Gatesman. IEEE Microwave and Wireless Components Letters, 2017, Vol. 27 (11), p. 99-991.
- Bioinspired flame retardant polymers of tyrosol, (Bouldin, R., Xia, Z., Klement, T., Kiratitanavit, W., Nagarajan, R.), Journal of Applied Polymer Science, 134, 45394 45394, 2017
- Multifunctional metal oxide nanoparticle decorated polypropylene knitted swatches, (Unlu, I., Soares, J., Steeves, D., Pang, R., Welsh, E., Whitten, J.), Journal of Materials Science, 53, 1514 1526, 2017
2016
- Thiol Adsorption on and Reduction of Copper Oxide Particles and Surfaces (Wang, Y., Im, J., Soares, J., Steeves, D., Whitten, J.), Langmuir : the ACS journal of surfaces and colloids, 32, 3848 3857, 2016, Vol. 32 (16), p. 3848-3857
- Characterization of temperature-dependent tensile and flexural rigidities of a cross-ply thermoplastic lamina with implementation into a forming model, (Dangora, L., Mitchell, C., White, K., Sherwood, J., Parker, J.), International Journal of Material Forming, 11, 43 52, 2016
2015
- Challenges associated with shear characterization of a cross-ply thermoplastic lamina using picture frame tests, (Dangora, L., Hansen, C., Mitchell, C., Sherwood, J., Parker, J.), Composites Part A-applied Science and Manufacturing, 78, 181 190, 2015
- Photocatalytic Activity and Fluorescence of Gold/Zinc Oxide Nanoparticles Formed by Dithiol Linking, (Unlu, I., Soares, J., Steeves, D., Whitten, J.), Langmuir : the ACS journal of surfaces and colloids, 31, 8718 8725, 2015
- Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture, (Dangora, L., Mitchell, C., Sherwood, J.), Composites Part A-applied Science and Manufacturing, 78, 102 112, 2015