Carol Barry is the Co-Director, Nanomanufacturing Center of Excellence; Associate Director, NSF Center for High-rate Nanomanufacturing; Professor and Associate Department Chair for Undergraduate Programs in Plastics Engineering at UMass Lowell.

Carol M.F. Barry

Chair, Professor

College
Francis College of Engineering
Department
Plastics Engineering
Phone
978-934-3436

Expertise

Plastics processing, including extrusion, injection molding, and novel processing techniques; nanomanufacturing with polymers; 3D printing

Research Interests

Plastics processing, including extrusion, injection molding, and novel processing techniques, Nanomanufacturing with polymers, including compounding and forming of polymer and rubber nanocomposites, coextrusion of multilayer films, injection molding and embossing of micro and nanostructured surfaces, and template-directed assembly and transfer of nanoelements, 3D printing, specifically development of new materials for substrates and 3D printing as well as development of new printing techniques

Selected Publications

  • Chandekar, A., Alabran, M., Sengupta, S.K., Lee, J.S., Mead, J.L., Barry, C.M., Whitten, J.E., Somu, S., Busnaina, A.A. (). Fabrication of stamps for microcontact printing by injection molding. Microelectronic Engineering, 85 187-194.
  • Birkar, S., Mendible, G., Park, J., Mead, J.L., Johnston, S.P., Barry, C.M. (2016). Effect of feature spacing when injection molding parts with microstructured surfaces. Polymer Engineering & Science, 56(12) 1330–1338.
  • Devre, R.D., Budhlall, B., Barry, C.M. (2016). Enhancing the colloidal stability and electrical conductivity of single-walled carbon nanotubes dispersed in water. Macromolecular Chemistry and Physics, 217(5) 683–700.
  • Vega, Marisely De Jesus, ., Mead, J.L., Barry, C.M., Holzer, C.H., Payer, M. (2016). Injection molding microstructured substrates from rubber-containing polymers (1779:1 pp. 020012).
  • Zhang, J., Panwar, A., Bello, D., Jozokos, T., Isaacs, J.A., Barry, C.M., Mead, J.L. (2016). The effects of recycling on the properties of carbon nanotube-filled polypropylene composites and worker exposures. Environmental Science: Nano, 3(2) 409–417.
  • Barry, C.M., Budhlall, B., Nagarajan, R. (2016). Undergraduate modules for bio-based plastics: educational modules focused on bio-based polymers resulted in good learning outcomes for undergraduate students. Plastics Engineering, 72(3) 30.
  • Hajisaeid, E., Haghzadeh, M., Shone, M., Mooney, P., Panwar, A., Barry, C.M., Mead, J.L., Armiento, C., Akyurtlu, A. (2016). Printed tunable frequency selective surface on a developed flexible functionalized ceramic-polymer based substrate (pp. 1–5). IEEE Phased Array Conference
  • Mead, J.L., Barry, C.M., Shearer, J., Panwar, A., Zhang, J. (2016). Methods and system for mass production, volume manufacturing of re-entrant structures. Google Patents
  • Kang, Y., Pitto-Barry, A., Willcock, H., Quan, W., Kirby, N., Sanchez, A.M., O’Reilly, R.K. (2015). Exploiting nucleobase-containing materials - from monomers to complex morphologies using RAFT dispersion polymerization. Polymer Chemistry.
  • Kang, Y., Pitto-Barry, A., Maitland, A., O’Reilly, R.K. (2015). RAFT dispersion polymerization. Polymer Chemistry.
  • Wright, D.B., Patterson, J.P., Pitto-Barry, A., Lu, A., Kirby, N., Gianneschi, N.C., Chassenieux, C., Colombani, O., O’Reilly, R.K. (2015). The copolymer blending method. Macromolecules.
  • Wright, D.B., Patterson, J.P., Pitto-Barry, A., Cotanda, P., Chassenieux, C., Colombani, O., O’Reilly, R.K. (2015). Tuning the aggregation behavior of pH-responsive micelles by copolymerization. Polymer Chemistry.
  • De Jesus, M., Birkar, S., Mead, J.L., Barry, C.M. (2014). Comparison of microstructured surfaces using injection molding and nanoimprint lithography.
  • Xie, M., Jian, R., Barry, C.M., Mead, J.L. (2014). Effect of compatibilizers and number of layers on mechanical properties of TPV/PS multilayer films by co-extrusion.
  • Birkar, S., Park, J., Mead, J.L., Barry, C.M. (2014). Effect of feature spacing when injection molding parts with microstructured surfaces.
  • Birkar, S., Peng, W., Barry, C.M., Mead, J.L. (2014). Investigation of rheological and mechanical properties of polyether block amide/thermoplastic polyurethane blends prepared using twin screw extrusion.
  • Liezl, W.S., Acevedo, J., Kumbhani, M., Shearer, J., Mead, J.L., Barry, C.M. (2014). Novel approach in fabrication of printed metal tooling.
  • Jian, R., Xie, M., Barry, C.M., Mead, J.L. (2014). Study on mechanical properties of (CNT filled polystyrene/thermoplastic vulcanizates) multilayer structures prepared by coextrusion methods.
  • Zhang, J., Panwar, A., Barry, C.M., Mead, J.L. (2014). The effect of reprocessing on mechanical properties of polypropylene.
  • Kumar, A., Modi, S., Panwar, A., Schmidt, D., Barry, C.M., Mead, J.L. (2014). Highly Impermeable Nanocomposites of Brominated Butyl Rubber with Modified Montmorillonite Clay. Rubber Chemistry and Technology, 87 579-592.
  • Shearer, J., Barry, C., Mead, J.L. (2014). Continuous extrusion process for preparation of polymer nanocomposites (3: pp. 174-177). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Nahum, T., Mitra, S., Panwar, A., Barry, C., Dodiuk, H., Kenig, S., Mead, J. (2014). Durable superhydrophobic coatings for icephobic applications (1: pp. 229-232). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Jian, R., Panwar, A., Barry, C.M., Mead, J.L. (2014). Effect of layer multiplying extrusion on the morphology and properties of PS/CNT nanocomposites (1: pp. 396-399). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Barry, C.M., Mead, J.L. (2014). High-rate manufacturing of 3D products with micro and nanostructured surfaces (3: pp. 182-185). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Wee Sit, L., Kumbhani, M., Avecedo Genera, J., Shearer, J., Mead, J.L., Barry, C.M. (2014). Novel additive manufacturing of tooling with micro and nanostructured surfaces (3: pp. 178-181). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Mead, J.L., Barry, C.M. (2014). Polymer based continuous offset printing (3: pp. 202-205). Technical Proceedings of the 2014 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2014
  • Lohmeier, J., Gu, Z., Budhlall, B., Sun, H., Barry, C.M., Donatelli, A.A. (2013). A new interdisciplinary engineering course on nanoscale transport phenomena (23: pp. 1). American Society of Engineering Education (ASEE) Proceedings
  • Modi, S., Panwar, A., Mead, J., Barry, C. (2013). Effect of molecular weight on the electrophoretic deposition of carbon black nanoparticles in moderately viscous systems. Langmuir, 29(31) 9702-9711.
  • Fang, L., Wei, M., Wongkasem, N., Jaradat, H., Mokhlis, A., Shen, J., Akyurtlu, A., Marx, K.A., Barry, C.M., Mead, J.L. (2013). Tin assisted transfer of electroplated metal nanostructures and its application in flexible chiral metamaterials. Microelectronic Engineering, 107 42-49.
  • Gu, Z., Budhlall, B., Sun, H., Barry, C., Donatelli, A., Lohmeier, J. (2013). A new interdisciplinary engineering course on nanoscale transport phenomena. ASEE Annual Conference and Exposition, Conference Proceedings
  • Dempsey, D., Barry, C., Mead, J. (2013). A student-directed professional development program for doctoral students seeking industry placement. ASEE Annual Conference and Exposition, Conference Proceedings
  • Moriarty, M., Kazmer, D., Barry, C.M., Mead, J.L., Santeufemio, C. (2013). Development of an induction heated roll-to-roll lithography process (1: pp. 872-876). Annual Technical Conference - ANTEC, Conference Proceedings
  • Moriarty, M., Kazmer, D., Barry, C.M., Mead, J.L., Santeufemio, C. (2013). Development of induction heated roll-to-roll lithography process (3: pp. 2711-2715). Annual Technical Conference - ANTEC, Conference Proceedings
  • Cohen, E.b., Dodiuk, H., Ophir, A., Kenig, S., Barry, C., Mead, J. (2013). Evidences for π-interactions between pyridine modified copolymer and carbon nanotubes and its role as a compatibilizer in poly(methyl methacrylate) composites. Composites Science and Technology, 79 133-139.
  • Cohen, E., Ophir, A., Kenig, S., Barry, C., Mead, J. (2013). Pyridine-modified polymer as a non-covalent compatibilizer for multi-walled CNT/poly[ethylene-co-(methacrylic acid)] composites fabricated by direct melt mixing. Macromolecular Materials and Engineering, 298(4) 419-428.
  • Cohen, E., Zonder, L., Ophir, A., Kenig, S., McCarthy, S., Barry, C., Mead, J. (2013). Hierarchical structures composed of confined carbon nanotubes in cocontinuous ternary polymer blends. Macromolecules, 46(5) 1851-1859.
  • Fang, L., Wei, M., Warasitthinon, N., Shen, J., Jian, R., Schmidt, D., Barry, C.M., Mead, J.L. (2013). Preparation and properties of styrene-butadiene rubber/clay nanocomposites by using liquid rubber/clay master batches. Rubber Chemistry and Technology, 86(1) 96-108.
  • Shen, J., Wei, M., Busnaina, A., Barry, C., Mead, J. (2013). Directed assembly of conducting polymers on sub-micron templates by electrical fields. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 178(3) 190-201.
  • Tsai, C.S., White, D., Rodriguez, H., Munoz, C.E., Huang, C.Y., Tsai, C.J., Barry, C.M., Ellenbecker, M.J. (2012). Exposure assessment and engineering control strategies for airborne nanoparticles: an application to emissions from nanocomposite compounding processes. Journal of Nanoparticle Research, 14(7) 1-14.
  • Fang, L., Wei, M., Shang, Y., Kazmer, D., Barry, C.M., Mead, J. (2012). Precise pattern replication of polymer blends into nonuniform geometries via reducing interfacial tension between two polymers. Langmuir, 28(27) 10238-10245.
  • Kumar, A., Kazmer, D.O., Barry, C.M., Mead, J.L. (2012). Pulsed electric field assisted assembly of polyaniline. Nanotechnology, 23(33).
  • Tsai, C., White, D., Rodriguez, H., Munoz, C., Huang, C., Tsai, C., Barry, C.M., Ellenbecker, M. (2012). Exposure assessment and engineering control strategies for airborne nanoparticles: an application to emissions from nanocomposite compounding processes. Journal of Nanoparticle Research, 14(7) 1.
  • Ngabonziza, Y., Li, J., Barry, C.M. (2011). Electrical conductivity and mechanical properties of multiwalled carbon nanotube-reinforced polypropylene nanocomposites. Acta Mechanica, 220(1-4) 289-298.
  • Ma, X., Huo, H., Wei, M., Wang, L., Shen, M., Barry, C.M., Mead, J. (2011). Enhanced protein binding on femtosecond laser ablated poly(methyl methacrylate) surfaces. Applied Physics Letters, 98(17).
  • Yoon, S.H., Padmanabha, P., Cha, N.G., Mead, J.L., Barry, C.M. (2011). Evaluation of vacuum venting for micro-injection molding. International Polymer Processing, 26(4) 346-353.
  • Duffy, J., Barrington, L., West, C., Heredia, M., Barry, C.M. (2011). Service-Learning Integrated throughout a College of Engineering (SLICE). Advances in Engineering Education, 2(4) 1-23.
  • Shang, Y., Fang, L., Wei, M., Barry, C.M., Mead, J., Kazmer, D. (2011). Verification of numerical simulation of the self-assembly of polymer-polymer-solvent ternary blends on a heterogeneously functionalized substrate. Polymer, 52(6) 1447-1457.
  • Kumar, A., Wei, M., Barry, C.M., Chen, J., Mead, J. (2010). Controlling fiber repulsion in multijet electrospinning for higher throughput. Macromolecular Materials and Engineering, 295(8) 701-708.
  • Sung-Hwan Yoon, ., Nam-Goo Cha, ., Lee, J.S., Jin-Goo Park, ., Carter, D.J., Mead, J.L., Barry, C.M. (2010). Effect of Processing Parameters, Antistiction Coatings, and Polymer Type when Injection Molding Microfeatures. Polymer Engineering & Science, 50(2) 411.
  • Fang, L., Wei, M., Barry, C.M., Mead, J. (2010). Effect of Spin Speed and Solution Concentration on the Directed Assembly of Polymer Blends. Macromolecules, 43(23).
  • Ashter, A., Tsai, S.J., Lee, J.S., Ellenbecker, M.J., Mead, J.L., Barry, C.M. (2010). Effects of nanoparticle feed location during nanocomposite compounding. Polymer Engineering and Science, 50(1) 154-164.
  • Yoon, S.H., Lee, K.H., Palanisamy, P., Lee, J.S., Cha, N.G., Carter, D.J., Mead, J.L., Barry, C.M. (2010). Enhancement of surface replication by gas assisted microinjection moulding. Plastics, Rubber and Composites, 39(7) 293-299.
  • Wei, M., Murphy, D., Barry, C.M., Mead, J. (2010). Halogen-free flame retardants for wire and cable applications. Rubber Chemistry and Technology, 83(3) 282-302.
  • Shang, Y., Kazmer, D., Wei, M., Barry, C.M., Mead, J. (2010). Numerical simulation of the self-assembly of a polymer-polymer-solvent ternary system on a heterogeneously functionalized substrate. Polymer Engineering and Science, 50(12) 2329-2339.
  • Murphy, D., Barry, C.M., Mead, J., Zukas, W. (2010). The effect of mixed filler sizes on the fiber diameter of electrospun butyl rubber formulations. Rubber Chemistry and Technology, 83(4) 349-357.
  • Clarizia, L.A., Sok, D., Wei, M., Mead, J., Barry, C.M., McDonald, M.J. (2009). Antibody orientation enhanced by selective polymer-protein noncovalent interactions. Analytical and bioanalytical chemistry, 393(5) 1531-8.
  • Wei, M., Fang, L., Lee, J., Somu, S., Xiong, X., Barry, C.M., Busnaina, A., Mead, J. (2009). Directed assembly of polymer blends using nanopatterned templates. Advanced Materials, 21(7) 794-798.
  • Chiota, J., Shearer, J., Wei, M., Barry, C.M., Mead, J. (2009). Multiscale Directed Assembly of Polymer Blends Using Chemically Functionalized Nanoscale-Patterned Templates. Small, 5(24) 2788-2791.
  • Fang, L., Wei, M., Shang, Y., Jimenez, L., Kazmer, D., Barry, C.M., Mead, J. (2009). Surface morphology alignment of block copolymers induced by injection molding. Polymer, 50(24) 5837-5845.
  • Tsai, S.J., Ashter, A., Ada, E., Mead, J.L., Barry, C.M., Ellenbecker, M.J. (2008). Airborne nanoparticle release associated with the compounding of nanocomposites using nanoalumina as fillers. Aerosol and Air Quality Research, 8(2) 160-177.
  • Tsai, S., Ashter, A., Ada, E., Mead, J.L., Barry, C.M., Ellenbecker, M.J. (2008). Control of airborne nanoparticles release during compounding of polymer nanocomposites. NANO, 3(4) 301-309.
  • Kim, D., Lee, J.S., Barry, C.M., Mead, J.L. (2008). Evaluation and prediction of the effects of melt-processing conditions on the degree of mixing in alumina/poly(ethylene terephthalate) nanocomposites. Journal of Applied Polymer Science, 109(5) 2924-2934.
  • Shang, Y., Kazmer, D., Wei, M., Mead, J., Barry, C.M. (2008). Numerical simulation of phase separation of immiscible polymer blends on a heterogeneously functionalized substrate. The Journal of chemical physics, 128(22).
  • Kim, D., Lee, J.S., Barry, C.M., Mead, J.L. (2007). Effect of fill factor and validation of characterizing the degree of mixing in polymer nanocomposites. Polymer Engineering & Science, 47(12) 2049-2056.
  • Kim, D., Lee, J.S., Barry, C.M., Mead, J.L. (2007). Microscopic measurement of the degree of mixing for nanoparticles in polymer nanocomposites by TEM images. Microscopy research and technique, 70(6) 539-546.
  • Barry, C.M., Chen, J., Mead, J., Schmidt, D. (2007). Multi-scale processing of polymers and nanocomposites (pp. 30-30). Mater.Process.Handb.
  • Barry, C.M., Chen, J., Mead, J. (2007). Nanomanufacturing processes using polymeric materials (pp. 313-350). Nanomanuf.Handb.
  • Kang, D., Kim, D., Yoon, S.H., Kim, D., Barry, C.M., Mead, J. (2007). Properties and dispersion of EPDM/modified-organoclay nanocomposites. Macromolecular Materials and Engineering, 292(3) 329-338.
  • Duffy, J., Kazmer, D.O., Barrington, L., Ting, J., Barry, C.M., Zhang, X., Clark, D., Rux, A. (2007). Service-learning integrated into existing core courses throughout a college of engineering.
  • Wei, M., Tao, Z., Xiong, X., Kim, M., Lee, J., Somu, S., Sengupta, S., Busnaina, A., Barry, C.M., Mead, J. (2006). Fabrication of patterned conducting polymers on insulating polymeric substrates by electric-field-assisted assembly and pattern transfer. Macromolecular Rapid Communications, 27(21) 1826-1832.
  • Barry, C.M., Baker, A., Mead, J.L. (2006). Introduction to Polymers and Plastics. Handbook of Plastics Technology
  • Schmidt, D., Mead, J.L., Barry, C.M., Chen, J. (2006). Nanomanufacturing with Polymers. Handbook of Plastics Technology
  • Chandekar, A., Sengupta, S.K., Barry, C.M., Mead, J.L., Whitten, J.E. (2006). Template-directed adsorption of block copolymers on alkanethiol-patterned gold surfaces. Langmuir, 22(19) 8071-8077.
  • Tao, Z., Viriyabanthorn, N., Ghumman, B., Barry, C.M., Mead, J. (2005). Heat resistant elastomers. Rubber Chemistry and Technology, 78(3) 489-515.
  • Wong, T.L., Barry, C.M., Orroth, S.A. (2004). The effects of filler size on the properties of thermoplastic polyolefin blends. Journal of Vinyl and Additive Technology, 5(4) 235-240.
  • Barry, C.M., STACER, R.G. (2000). Development of weld line strength in injection-molded poly (methyl methacrylate). The Journal of injection molding technology, 4(3) 152-158.
  • O'Brien-Soucy, A.K., Barry, C.M., Stager, R.G. (2000). Development of weld line strength in injection-molded poly(methyl methacrylate). Journal of Injection Molding Technology, 4(3) 152-158.
  • Barry, C.M., Orroth, S.A. (2000). Processing of Thermoplastics (pp. 5-1). Modern Plastics Handbook; Harper, C.A., Ed.; McGraw-Hill
  • Deanin, R.D., Barry, C.M., Woramongconchai, S., Parikh, S.C. (1998). Recycling of Mixed Automotive Plastics. Macromolecular Symposia, 135 55-62.
  • Baker, A.M., Barry, C.M. (1997). Effects of composition, processing, and structure on properties of engineering plastics (pp. 434-456). Materials Park, OH: ASM International, 1997.
  • Ellis, C.L., Barry, C.M. (1996). A Study of the Synergism of Poly(Vinyl Chloride)/ Polyether-Ester Blends. Journal of Vinyl and Additive Technology, 2(4) 326-329.

Selected Contracts, Fellowships, Grants and Sponsored Research

  • Feasibility Study of New Processing Methods for Enhanced Products (2015), Grant - Rogers Corp.
    Johnston, S.P., Barry, C.M.
  • TGA Analysis (2014), -
    Barry, C.M. (Principal)
  • Compounding Various Blends (2013), -
    Barry, C.M. (Principal)
  • DSC and TGA Analysis (2012), -
    Barry, C.M. (Principal)
  • ($200K) TUES: Biobased Plastics for a Sustainable Future: Undergraduate Educational Modules for the Engineering Cirricula (2011), Grant - National Science Foundation
    Budhlall, B. (Principal), Barry, C.M. (Co-Principal), Nagarajan, R. (Co-Principal)
  • Elastomer Mixing Trial (2014), -
    Barry, C.M. (Principal)
  • Mixing and Impact Properties of Polymer Carbon Nanotube Composites (2013), -
    Barry, C.M. (Co-Principal)
  • Biobased Plastics for a Sustainable Future: Undergraduate Educational Modules for (2011), Grant -
    Barry, C.M. (Co-Principal)
  • Viscosity of Various Material Formulations (2014), -
    Barry, C.M. (Co-Principal)
  • Viscosity of Various Material Formulations (2014), Grant - Free Think Technologies Inc.
    Johnston, S.P. (Principal), Barry, C.M.
  • DMA Analysis (2014), -
    Barry, C.M. (Principal)
  • TGA Analysis (2013), -
    Barry, C.M. (Principal)
  • Laboratory Banbury Mixing of Butyl Stock Mix (2012), -
    Barry, C.M. (Co-Principal)
  • Ares G2 Rheometry Analysis (2014), -
    Barry, C.M. (Co-Principal)
  • Reactive Extrusion on Biopolymer Candidates (2014), Grant -
    Barry, C.M. (Co-Principal)
  • UML Industry Outreach (2010), Contract - MASSACHUSETTS TECHNOLOGY COLLABORATIVE
    Barry, C.M. (Co-Principal)
  • UML Industry Outreach (2010), Contract - MASSACHUSETTS TECHNOLOGY COLLABORATIVE
    Barry, C.M. (Co-Principal)
  • Evaluation of materials and properties for molded microstructures (2013), Contract - DEFENSE ADV RESEARCH PROJECTS AGENCY
    Barry, C.M. (Co-Principal)
  • DMA Testing (2013), -
    Barry, C.M. (Principal)
  • DSC and TGA Analysis (2013), -
    Barry, C.M. (Principal)
  • NUE: Interdisciplinary Course - Nanoscale Transport Phenomena for Manufacturing N (2010), Grant -
    Barry, C.M. (Co-Principal)
  • DSC Testing of Various Wet and Cured Epoxy Samples (2013), -
    Barry, C.M. (Principal)
  • Fiber/Polyurethane Dispersion Trials (2012), -
    Barry, C.M. (Principal)
  • Compounding grapheme and Polystyrene (2011), -
    Barry, C.M. (Co-Principal)
  • Material characterization and testing on customer molded samples (2011), -
    Barry, C.M. (Principal)
  • Compounding Nylon with Carbon Black and Carbon Nanotubes (2012), -
    Barry, C.M. (Co-Principal)
  • Honeywell Molding Project (2011), -
    Barry, C.M. (Principal)
  • Nanomanufacturing Center For Excellence (2011), -
    Barry, C.M. (Co-Principal)
  • Nanomanufacturing Center For Excellence (2011), -
    Barry, C.M. (Co-Principal)
  • Nanomanufacturing Center For Excellence (2011), -
    Barry, C.M. (Principal)
  • Reactive Extrusion (2011), -
    Barry, C.M. (Principal)
  • Nanomanufacturing of Multifunctional Sensors (2010), Contract -
    Barry, C.M. (Principal)
  • ARRA - REU Site: Incorporating Ethical Decisions into Nanomanufacturing Research (2009), Grant -
    Barry, C.M. (Principal)
  • ARRA - REU Site: Incorporating Ethical Decisions into Nanomanufacturing Research (2009), Grant -
    Barry, C.M. (Principal)
  • Funding For Various Initiatives (2009), -
    Barry, C.M. (Co-Principal)
  • Nano/Micro-Injections Molding of Multi-Scale Features (2009), -
    Barry, C.M. (Principal)
  • Tensile Test Meaurement of Epoxy Photoresists (2011), -
    Barry, C.M. (Co-Principal)
  • Dispersion Trial Using Various Loadings of Carbon Black and Fumed Silica In Polym (2010), -
    Barry, C.M. (Co-Principal)
  • Nanomanufacturing of Multifunctional Sensors (2009), -
    Barry, C.M. (Principal)
  • Mixing of Travel Materials (2010), -
    Barry, C.M. (Principal)
  • Nanomanufacturing of Multifunctional Sensors (2007), Grant -
    Barry, C.M. (Principal)
  • Exploring the Injection Moldability of Complex Microfeatures (2009), - U.S. DEPARTMENT OF DEFENSE
    Barry, C.M. (Principal)
  • Exploring the Injection Moldability of Complex Microfeatures (2009), - U.S. DEPARTMENT OF DEFENSE
    Barry, C.M. (Principal)
  • Tamper Indicating Stretch Wrap (2007), Grant - U.S. DEPARTMENT OF HOMELAND SECURITY
    Barry, C.M. (Principal)
  • Mold Design and Process Optimization for Injection Molding of a Microfluidic Devi (2007), Grant -
    Barry, C.M. (Principal)
  • REU-Research Experiences for Undergraduates (2005), Grant - NATIONAL SCIENCE FOUNDATION
    Barry, C.M. (Principal)
  • REU-Research Experiences for Undergraduates (2005), Grant - NATIONAL SCIENCE FOUNDATION
    Barry, C.M. (Principal)
  • Batch Mixing of Experimental Compounds (2006), Grant -
    Barry, C.M. (Principal)
  • Introduction to Nano-Engineering: A Web-based Approach to Expand Nanotechnology Horizons (2004), Grant - National Science Foundation
    Tello, S.F., Barry, C.M.